Motion Sensor LED Bulb 9W & 7W – PIR Motion Activated Dusk to Dawn Bulb

₨ 800

A radar motion sensor LED bulb in 9W and 7W that switches on when it senses movement and stays off in daylight. Hands-free light for hallways, staircases, porches and storerooms.

Out of stock

Description

Motion sensor bulb shoppers want light that appears exactly when it is needed and disappears when it is not. This radar (microwave) motion sensor LED bulb does just that: it switches on when it senses movement and switches off again when the room is empty, so you never walk into a dark hallway or leave a light burning in an empty room. Available in 9W and 7W, it is a simple, hands-free upgrade for the rooms and doorways you pass through every day.

How a motion sensor bulb works

Inside the bulb is a radar (microwave) motion sensor that detects movement when a person enters the room. When it detects motion, the bulb lights up straight away, so the room is lit before you have taken more than a step or two. When no movement is detected, the bulb switches itself off again after about 20 seconds.

There is nothing to press and nothing to remember. You fit the bulb like an ordinary bulb, and the sensor does the rest. It is the kind of small convenience you notice most on busy mornings, late at night, and whenever your hands are full.

Two wattages: 9W and 7W

This motion sensor bulb comes in two wattages, 9W and 7W, so you can match the brightness to the space. The 9W bulb suits larger areas where you want a brighter light, such as a hallway, a staircase or a porch. The 7W bulb is a gentler choice for smaller spaces, such as a storeroom, a bathroom or a passage where a softer light is enough.

Both are LED bulbs, so they use far less electricity than an old-style bulb of similar brightness. Choosing the right wattage for the room keeps the light comfortable and the electricity use low.

Dusk to dawn, only when you need it

As well as sensing motion, the bulb is dusk-to-dawn aware: it only switches on when the room is dark. In daylight, when there is already enough light, the sensor holds the bulb off even if someone walks past. That means the bulb works at night and stays off during the day, without you touching a switch.

This day-and-night behaviour is what makes the bulb genuinely useful rather than just clever. It lights the way after dark, when you need it most, and it never wastes electricity lighting a room that is already bright.

Where to use a motion sensor bulb

A motion sensor bulb earns its place in the spots you pass through with your hands full or in the dark. Fit one in the hallway so you are never fumbling for a switch when you come home at night. Put one on the staircase, where a lit step is safer than a dark one. A porch bulb that lights up as you approach the door is welcoming and practical, and a storeroom or garage bulb means you can carry boxes in and out without stopping to find the switch.

It also suits bathrooms and passages used during the night, and shared spaces such as stairwells in flats, where lights are often left on all night because nobody wants to switch them off in the dark.

Saving electricity without thinking about it

Because the bulb switches itself off when the room is empty, it stops the most common waste of household electricity: lights left on in empty rooms. You do not need to remind the family to switch lights off, and you do not need to go back and check. The sensor handles it every time, in every room where a bulb is fitted.

Over weeks and months, those saved hours add up. The bulb also lasts longer when it is only on while someone is actually using the room, so you replace bulbs less often as well as using less electricity.

Fitting and everyday use

Fitting the bulb is as simple as fitting any ordinary bulb: switch the power off, screw the bulb in, switch the power back on, and the sensor takes over. The bulb works with your existing light switch, which you can leave on so the sensor controls the light. If you ever want the light off for a longer period, use the switch as normal.

Once fitted, there is nothing to adjust and nothing to maintain. Walk in, the light comes on; walk out, it goes off. That is the whole routine.

Frequently asked questions

Is the motion sensor bulb currently in stock?
No. This listing is currently out of stock, so it cannot be ordered right now. Please check back later — this page will be updated when the motion sensor bulb is available again.

What wattages does this motion sensor bulb come in?
It is available in 9W and 7W. Choose 9W for a brighter light in larger spaces, or 7W for a gentler light in smaller rooms.

How does the radar sensor work?
The radar (microwave) sensor detects movement, so the bulb switches on when someone enters the room and switches off again about 20 seconds after no more movement is detected.

Does the bulb switch on during the day?
No. The bulb is dusk-to-dawn aware, so it stays off in daylight and only switches on when the room is dark and motion is detected.

Where should I use a motion sensor bulb?
Hallways, staircases, porches, storerooms, garages, bathrooms and passages are all good spots — anywhere you pass through with your hands full or in the dark.

Do I need a special switch or fitting?
No. The bulb fits like an ordinary bulb and works with your existing light switch, which you leave on so the sensor controls the light.

Reviews

There are no reviews yet.

Be the first to review “Motion Sensor LED Bulb 9W & 7W – PIR Motion Activated Dusk to Dawn Bulb”

Your email address will not be published. Required fields are marked *